HP P2000 G3 Cli Reference Guide

278 Alphabetical list of commands
show schedule-details
Description Shows information about a specified task schedule.
Syntax
show schedule-details schedule
Parameters schedule
Schedule name.
Example Show information about task schedule SnapSched:
# show schedule-details SnapSched
Schedule Details
----------------
Schedule Name: SnapSched
Schedule Specification: Start 2011-10-19 23:47:00, Every 3 Minutes
Status: Ready
Next Time: 2011-10-23 12:59:00
Task To Run: Snap
Error Message:
Tasks
-----
Task Name: Snap
Task Type: TakeSnapshot
Status: Ready
Task State: Start
Error Message:
Task Details
------------
Source Volume: VD1_V1
Source Volume Serial: SN
Prefix: VD1_V1
Count: 4
Last Created: VD1_V1_S0001
Snapshot Name Snapshot Serial
------------------------------------------------------
VD1_V1_S0001 SN
Success: Command completed successfully. (2011-10-10 15:25:34)
Basetypes • schedules
• status
See also • create schedule
• delete schedule
• show schedules

HP P2000 G3 Specifications

General

Model	P2000 G3
Category	Storage
Drive Support	SAS, SATA
Host Interface	iSCSI, Fibre Channel, SAS
Form Factor	2U
RAID Levels	0, 1, 5, 6, 10
Cache	2 GB
Drive Bays	12 (SFF), 24 (SFF), 12 (LFF)
Cache Memory	2GB per controller
Operating Temperature	10°C to 35°C
Power Supply	Redundant
Expansion Options	Disk Enclosures