HP P2000 G3 Cli Reference Guide

32 Alphabetical list of commands
abort replication
Description Aborts the current replication operation on the specified secondary volume. The current replication
may be running or suspended. This command must be issued on the system that owns the secondary
volume.
Syntax
abort replication
[set replication-set]
replication-volume
Parameters set replication-set
Optional. Name or serial number of the replication set.
replication-volume
Name or serial number of the secondary volume. If the name is not unique across replication sets,
specify the set parameter.
Example Abort replication of primary volume V1 to secondary volume rV1:
# abort replication rV1
Success: Command completed successfully. (2012-01-20 14:52:27)
See also • resume replication
• suspend replication
• show replication-sets
• show replication-volumes

HP P2000 G3 Specifications

General

Model	P2000 G3
Category	Storage
Drive Support	SAS, SATA
Host Interface	iSCSI, Fibre Channel, SAS
Form Factor	2U
RAID Levels	0, 1, 5, 6, 10
Cache	2 GB
Drive Bays	12 (SFF), 24 (SFF), 12 (LFF)
Cache Memory	2GB per controller
Operating Temperature	10°C to 35°C
Power Supply	Redundant
Expansion Options	Disk Enclosures