HP P2000 G3 Cli Reference Guide

122 Alphabetical list of commands
Reset the SMI-S configuration on both Storage Controllers:
# reset smis-configuration both
WARNING: The configuration of the SMIS service will be reset to default
settings. Any hosts registered via SMIS will need to be registered again. Are
you sure? yes
Info: SMIS service configuration has been reset for local controller.
(2013-01-10 16:56:41)
Info: SMIS service configuration has been reset for partner controller.
(2013-01-10 16:56:41)
Success: Command completed successfully. (2013-01-10 16:56:41)
See also • restore defaults

HP P2000 G3 Specifications

General

Model	P2000 G3
Category	Storage
Drive Support	SAS, SATA
Host Interface	iSCSI, Fibre Channel, SAS
Form Factor	2U
RAID Levels	0, 1, 5, 6, 10
Cache	2 GB
Drive Bays	12 (SFF), 24 (SFF), 12 (LFF)
Cache Memory	2GB per controller
Operating Temperature	10°C to 35°C
Power Supply	Redundant
Expansion Options	Disk Enclosures