To Next Page

To Previous Page

HP P2000 G3 MSA System CLI Reference Guide 175

remote-address ip=IPs|wwnn=WWNNs|wwpn=WWPNs

Optional. Remote addresses associated with the replication volume. Specifies host ports on the

remote system by IP address, World Wide Node Name, or World Wide Port Name. An IP address

value can include a port number; for example, 10.134.11.10:3260. Multiple values must be

separated by commas and no spaces; for example: ip=10.134.2.1,10.134.2.2.

set replication-set

Optional. Name or serial number of the replication set.

replication-volume

Name or serial number of the replication volume. If the name is not unique within the replication set,

the local volume is assumed. If the name is not unique across replication sets, specify the set

parameter.

Example Set a new remote address and error policy for replication volume MV2 in replication set RS1:

# set replication-volume-parameters remote-address ip=10.1.66.55 on-error

suspend set RS1 MV2

Success: Command completed successfully. (2012-01-21 16:10:04)

Other manuals for HP P2000 G3

Questions and Answers:

Need help?

Do you have a question about the HP P2000 G3 and is the answer not in the manual?

General