HP P2000 G3 Cli Reference Guide

HP P2000 G3 MSA System CLI Reference Guide 219
IOPS
Input/output operations per second, calculated over the interval since these statistics were last
requested or reset. This value will be zero if it has not been requested or reset since a controller
restart.
Number of Reads
Number of read operations since these statistics were last reset or since the controller was restarted.
Number of Writes
Number of write operations since these statistics were last reset or since the controller was restarted.
Data Read
Amount of data read since these statistics were last reset or since the controller was restarted.
Data Written
Amount of data written since these statistics were last reset or since the controller was restarted.
Reset Time
Date and time, in the format year-month-day hour:minutes:seconds, when these statistics
were last reset, either by a user or by a controller restart.
Output
(Historical)
Durable ID
Disk ID in the form disk_enclosure-number.disk-number.
Serial Number
Disk serial number.
Total I/Os
Total number of read and write operations since the last sampling time.
Number of Reads
Shown by the all parameter. Number of read operations since the last sampling time.
Number of Writes
Shown by the all parameter. Number of write operations since the last sampling time.
Data Transferred
Total amount of data read and written since the last sampling time.
Data Read
Shown by the all parameter. Amount of data read since the last sampling time.
Data Written
Shown by the all parameter. Amount of data written since the last sampling time.
Total IOPS
Total number of read and write operations per second since the last sampling time.
Read IOPS
Shown by the all parameter. Number of read operations per second since the last sampling time.
Write IOPS
Shown by the all parameter. Number of write operations per second since the last sampling time.
Total Bps
Total data transfer rate, in bytes per second, since the last sampling time.
Read Bps
Shown by the all parameter. Data transfer rate, in bytes per second, for read operations since the
last sampling time.
Write Bps
Shown by the all parameter. Data transfer rate, in bytes per second, for write operations since the
last sampling time.

HP P2000 G3 Specifications

General

Model	P2000 G3
Category	Storage
Drive Support	SAS, SATA
Host Interface	iSCSI, Fibre Channel, SAS
Form Factor	2U
RAID Levels	0, 1, 5, 6, 10
Cache	2 GB
Drive Bays	12 (SFF), 24 (SFF), 12 (LFF)
Cache Memory	2GB per controller
Operating Temperature	10°C to 35°C
Power Supply	Redundant
Expansion Options	Disk Enclosures