HP P2000 G3 MSA System CLI Reference Guide 221
Show historical statistics from a specified date and time range for disk 1.5:
# show disk-statistics 1.5 historical time-range "start 2011-12-05 4:40 PM end
2011-12-05 5:00 PM"
Durable ID Serial Number
-------------------------------------------
disk_1.5 SN
Total I/Os Data Transferred Total IOPS Total Bps I/O Resp Time
Sample Time
--------------------------------------------------------------------------
183018 11.9GB 203 13.3MB 222
2011-12-05 17:00:00
1961773 128.5GB 2179 142.8MB 240
2011-12-05 16:45:00
-------------------------------------------
Success: Command completed successfully. (2012-01-18 12:39:11)
Show all samples of historical statistics for disk 1.5:
# show disk-statistics 1.5 historical all
Durable ID Serial Number
-------------------------------------------
disk_1.5 SN
Total I/Os Number of Reads Number of Writes Data Transferred Data Read
Data Written Total IOPS Read IOPS Write IOPS Total Bps Read Bps
Write Bps Queue Depth I/O Resp Time Read Resp Time Write Resp Time
Average I/O Size Average Read I/O Size Average Write I/O Size
Number of Disk Errors Sample Time
--------------------------------------------------------------------------
121174 60588 60586 5800.5MB 2900.3MB
2900.1MB 134 67 67 6445.0KB 3222.5KB
3222.0KB 709072 13062 12759 13366
47.6KB 47.6KB 47.6KB
0 2012-01-18 12:30:00
...
-------------------------------------------
Success: Command completed successfully. (2012-01-18 12:39:27)
Basetypes • disk-statistics (live)
• drive-summary (historical)
• status
See also • reset all-statistics
• reset disk-error-statistics
• reset disk-statistics
• show controller-statistics
• show disks
• show host-port-statistics
• show vdisk-statistics
• show volume-statistics
To Next Page
Loading...
Need help?
General
