HP P2000 G3 Cli Reference Guide

HP P2000 G3 MSA System CLI Reference Guide 227
FRU P/N
Part number of the field-replaceable unit (FRU) that contains the component.
FRU S/N
Serial number of the FRU that contains the component.
Add'l Data
Additional data, if applicable:
• addr=: For a disk, the slot address.
• temp=: For a temperature sensor, the temperature.
• voltage=: For a voltage sensor, the voltage.
• --: No data.
Example Show enclosure status:
# show enclosure-status
Chassis Vendor Product ID CPLD EMP A CH:ID Rev EMP B CH:ID Rev
WWPN Status
-------------------------------------------------------------------------------
SN vendor product 21 00:031 1115 01:031 1115
WWPN OK
-------------------------------------------------------------------------------
Type # Status FRU P/N FRU S/N Add'l Data
-----------------------------------------------------
FAN 01 OK PN SN --
...
PSU 01 OK PN SN --
...
Temp 01 OK PN SN temp=37 C
...
Voltage 01 OK PN SN voltage=11.86
...
Disk 01 OK PN SN addr=0
...
-----------------------------------------------------
Success: Command completed successfully. (2012-01-18 15:01:36)
Basetypes • ses
• enclosure-components
• status
See also • show enclosures

HP P2000 G3 Specifications

General

Model	P2000 G3
Category	Storage
Drive Support	SAS, SATA
Host Interface	iSCSI, Fibre Channel, SAS
Form Factor	2U
RAID Levels	0, 1, 5, 6, 10
Cache	2 GB
Drive Bays	12 (SFF), 24 (SFF), 12 (LFF)
Cache Memory	2GB per controller
Operating Temperature	10°C to 35°C
Power Supply	Redundant
Expansion Options	Disk Enclosures