258 Alphabetical list of commands
PIP-Netmask
iSCSI only. Primary subnet mask IP address.
MAC
iSCSI only. Unique Media Access Control (MAC) hardware address, also called the physical
address.
SIP
iSCSI only. Secondary IP address. This field is only displayed during failover.
SIP-Gateway
iSCSI only. Secondary gateway IP address. This field is only displayed during failover.
SIP-Netmask
iSCSI only. Secondary subnet mask IP address. This field is only displayed during failover.
MAC(S)
iSCSI only. Secondary MAC address. This field is only displayed during failover.
Example Show port information for a system with two FC ports:
# show ports
Ports Media Target ID Status Speed(A) Speed(C) Health
Health Reason Health Recommendation
-----------------------------------------------------------------------------
A1 FC(L) WWPN Up 8Gb Auto OK
OK
Topo(C) PID
------------
Loop 0
A2 FC(-) WWPN Disconnected Auto N/A
There is no host connection to this host port. - No action is required.
Topo(C) PID
------------
Loop 0
-----------------------------------------------------------------------------
Success: Command completed successfully. (2012-01-18 15:03:24)
To Next Page
Loading...
