HP P2000 G3 - Page 291

HP P2000 G3 MSA System CLI Reference Guide 291
Example Show information for a system whose health is OK:
# show system
System Information
------------------
System Name: Storage-1
System Contact: J. Smith
System Location: Main lab
System Information: Used for order processing data
System Information: 10g iSCSI
Midplane Serial Number: SN
Vendor Name: vendor
Product ID: product
Product Brand: brand
SCSI Vendor ID: vendor-ID
SCSI Product ID: product-ID
Enclosure Count: 2
Health: OK
Health Reason:
Supported Locales: English, Spanish, French, German, Italian, Japanese, Dutch,
Chinese-Simplified, Chinese-Traditional, Korean
Success: Command completed successfully. (2011-10-10 15:28:14)
Show information for a system whose health is degraded because of a problem with a vdisk:
# show system
System Information
------------------
System Name: Storage-2
System Contact: J. Smith
System Location: Main lab
System Information: Used for testing
Midplane Serial Number: SN
Vendor Name: vendor
Product ID: product
Product Brand: brand
SCSI Vendor ID: vendor-ID
SCSI Product ID: product-ID
Enclosure Count: 1
Health: Degraded
Health Reason: See the information about unhealthy components for guidance.
Supported Locales: English, Spanish, French, German, Italian, Japanese, Dutch,
Chinese-Simplified, Chinese-Traditional, Korean
Unhealthy Component
-------------------
Component ID: Vdisk vd01
Health: Degraded
Health Reason: The vdisk is not fault tolerant. Reconstruction cannot start
because there is no spare disk available of the proper type and size.
Health Recommendation: - Replace the failed disk.
- Configure the new disk as a spare so the system can start reconstructing the
vdisk.
- To prevent this problem in the future, configure one or more additional disks
as spare disks.
Success: Command completed successfully. (2012-01-19 10:37:52)