HP P2000 G3 MSA System CLI Reference Guide 311
Total Bps
If the perf parameter is specified, this field shows the data transfer rate, in bytes per second, since
the last sampling time.
Health
• OK
• Degraded
• Fault
• Unknown
Health Reason
If Health is not OK, this field shows the reason for the health state.
Health Recommendation
If Health is not OK, this field shows recommended actions to take to resolve the health issue.
Example Show information for all vdisks:
# show vdisks
Name Size Free Own Pref RAID Disks Spr Chk Status Jobs
Job% Serial Number Drive Spin Down Spin Down Delay Health
Health Reason Health Recommendation
-----------------------------------------------------------------------------
VD1 587.1GB 116.7GB B B RAID50 6 0 64k FTOL VRSC
41% SN Disabled 0 OK
VD2 146.5GB 95.7GB A A RAID0 2 0 64k UP
SN Enabled - all spinning 15 OK
VD3 900.1GB 900.1GB B B RAID1 2 0 N/A OFFL INIT
2% SN Disabled 0 OK
-------------------------------------------------------------------------
Success: Command completed successfully. (2012-01-19 15:31:35)
Show information for all vdisks, with performance statistics fields:
# show vdisks perf
Name Size Free Own Pref RAID Disks Spr Chk Status Jobs
Job% Serial Number Drive Spin Down Spin Down Delay
Data Transferred Total Bps Health Health Reason Health Recommendation
-----------------------------------------------------------------------------
vd01 587.4GB 587.4GB A A RAID5 5 0 64k FTOL
SN Disabled 0
25.6MB 28.1KB OK
...
-----------------------------------------------------------------------------
Success: Command completed successfully. (2012-01-19 15:31:50)
Basetypes • virtual-disks
• status
See also • create vdisk
• delete vdisks
• expand vdisk
• set vdisk
To Next Page
Loading...
Need help?
General
