HP P2000 G3 Cli Reference Guide

318 Alphabetical list of commands
Example Show all volume mappings:
# show volume-maps
Volume View [Serial Number (SN) Name (v1) ] Mapping:
Ports LUN Access Host-Port-Identifier Nickname Profile
-----------------------------------------------------------------------
A1,A2,B1,B2 501 read-write all other hosts Standard
Volume View [Serial Number (SN) Name (v2) ] Mapping:
Ports LUN Access Host-Port-Identifier Nickname Profile
------------------------------------------------------------------
A1,B1 101 read-write 207000c0ff001121 Host2 Standard
A1 100 read-only 207000c0ff001122 Host1 Standard
not-mapped all other hosts Standard
Success: Command completed successfully. (2012-01-19 15:33:50)
Basetypes • volume-view
• status
See also • show host-maps
• show hosts
• show volumes

HP P2000 G3 Specifications

General

Model	P2000 G3
Category	Storage
Drive Support	SAS, SATA
Host Interface	iSCSI, Fibre Channel, SAS
Form Factor	2U
RAID Levels	0, 1, 5, 6, 10
Cache	2 GB
Drive Bays	12 (SFF), 24 (SFF), 12 (LFF)
Cache Memory	2GB per controller
Operating Temperature	10°C to 35°C
Power Supply	Redundant
Expansion Options	Disk Enclosures