EasyManuals Logo

HP P2000 G3 Cli Reference Guide

HP P2000 G3
532 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #368 background imageLoading...
Page #368 background image
368 XML API basetype properties
failed-over string Indicates whether the partner controller has failed over to this controller.
No: The partner controller has not failed over to this controller.
Yes: The partner controller has either failed or been shut down, and its
responsibilities have been taken over by this controller. There will be a delay
between the time that the value of Status becomes Down for one controller
and the time that the value of Failed Over to This Controller
becomes Yes for the other controller. This time period is the time that it takes
for a controller to take over the responsibilities of its partner.
failed-over-
numeric
string Numeric equivalents for failed-over values.
0: No
1: Yes
fail-over-
reason
string If failed-over is Yes, a reason for the failover appears; otherwise, Not
applicable appears.
fail-over-
reason-numeric
string Numeric equivalents for fail-over-reason values.
sc-fw string Storage Controller firmware version.
vendor string Controller manufacturer.
model string Controller model.
sc-cpu-type string Storage Controller processor type.
sc-cpu-speed sint32 Storage Controller processor speed.
internal-
serial-number
string Internal serial number of the controller.
cache-lock string Shows whether hosts are prevented from using the SCSI MODE SELECT
command to change the storage system's write-back cache setting.
No: Hosts are permitted to disable write-back cache.
Yes: Hosts are prevented from disabling write-back cache. This is the
default.
cache-lock-
numeric
string Numeric equivalents for cache-lock values.
0: No
1: Yes
write-policy string The current, system-wide cache policy as determined by auto-write-through
(AWT) logic. This value is not settable by users. If an AWT trigger condition
(such as a CompactFlash failure) is met, the cache policy for all volumes
changes to write-through, overriding the volume-specific settings. When the
problem is corrected, the cache policy reverts to the value configured for each
individual volume.
write-back: This is the normal state.
write-through
Not up: The controller is not up.
write-policy-
numeric
string
Numeric equivalents for write-policy values.
0: write-back
1: write-through
2: Not up.
description string FRU long description.
part-number string Part number for the FRU.
revision string Hardware revision level for the FRU.
Table 19 controllers properties (continued)
Name Type Description

Table of Contents

Other manuals for HP P2000 G3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP P2000 G3 and is the answer not in the manual?

HP P2000 G3 Specifications

General IconGeneral
ModelP2000 G3
CategoryStorage
Drive SupportSAS, SATA
Host InterfaceiSCSI, Fibre Channel, SAS
Form Factor2U
RAID Levels0, 1, 5, 6, 10
Cache2 GB
Drive Bays12 (SFF), 24 (SFF), 12 (LFF)
Cache Memory2GB per controller
Operating Temperature10°C to 35°C
Power SupplyRedundant
Expansion OptionsDisk Enclosures

Related product manuals