HP P2000 G3 Cli Reference Guide

386 XML API basetype properties
Example
# show disk-parameters
...
<OBJECT basetype="drive-parameters" name="drive-parameters" oid="1" format="pairs">
<PROPERTY name="smart" type="string">Enabled</PROPERTY>
<PROPERTY name="smart-numeric" type="string">1</PROPERTY>
<PROPERTY name="drive-write-back-cache" type="string">Disabled</PROPERTY>
<PROPERTY name="drive-write-back-cache-numeric" type="string">2</PROPERTY>
<PROPERTY name="drive-timeout-retry-max" type="uint8">3</PROPERTY>
<PROPERTY name="drive-attempt-timeout" type="uint8">8</PROPERTY>
<PROPERTY name="drive-overall-timeout" type="uint8">105</PROPERTY>
<PROPERTY name="disk-dsd-enable" type="string">Disabled</PROPERTY>
<PROPERTY name="disk-dsd-enable-numeric" type="string">0</PROPERTY>
<PROPERTY name="disk-dsd-enable-pool" type="string">Disabled</PROPERTY>
<PROPERTY name="disk-dsd-enable-pool-numeric" type="string">0</PROPERTY>
<PROPERTY name="disk-dsd-delay" type="uint16">0</PROPERTY>
<PROPERTY name="disk-dsd-delay-pool" type="uint16">0</PROPERTY>
</OBJECT>
...
disk-dsd-delay uint16 Shows the period of inactivity in minutes after which available disks and global
spares will spin down, from 1–360 minutes. The default is 15 minutes. The value
0 means spin down is disabled.
disk-dsd-
enable-pool-
numeric
string Not applicable.
Table 24 drive-parameters properties (continued)
Name Type Description

HP P2000 G3 Specifications

General

Model	P2000 G3
Category	Storage
Drive Support	SAS, SATA
Host Interface	iSCSI, Fibre Channel, SAS
Form Factor	2U
RAID Levels	0, 1, 5, 6, 10
Cache	2 GB
Drive Bays	12 (SFF), 24 (SFF), 12 (LFF)
Cache Memory	2GB per controller
Operating Temperature	10°C to 35°C
Power Supply	Redundant
Expansion Options	Disk Enclosures