HP P2000 G3 Cli Reference Guide

HP P2000 G3 MSA System CLI Reference Guide 453
monitor-numeric string Numeric equivalents for monitor values.
• 2: OK
• other: Failed
location string • Local: The replication volume is in the local system.
• Remote: The replication volume is in a remote system.
location-
numeric
string Numeric equivalents for location values.
• 0: Local
• 1: Remote
ip-address-a string IP address of the network port in controller A in the remote system.
ip-address-b string IP address of the network port in controller B in the remote system.
primary-volume-
name
string Primary volume name.
primary-volume-
serial
string Primary volume serial number.
primary-volume-
status
string Primary volume status.
• Online
• Conflict
• Offline
primary-volume-
status-numeric
string Numeric equivalents for primary-volume-status values.
• 0: Online
• 1: Conflict
• 2: Offline
max-queue uint32 Maximum number of replication images to consider when determining the next
image to replicate. Used only if the collision-policy property is set to
Oldest. The default is 32.
max-retry-time uint32 Maximum amount of time in seconds that the replication volume should retry a
replication operation on any specific image when errors occur. Used only if the
error-policy property is set to Retry. The default is 1800.
error-policy string Determines the action to take when an error occurs during replication.
• Retry: Retry the replication for the time specified by the max-retry-
time property. This is the default.
• Suspend: Suspend the replication until the error is resolved automatically or
through user intervention.
error-policy-
numeric
string Numeric equivalents for error-policy values.
• 0: Retry
• 1: Suspend
link-type string Type of ports used to link the primary and secondary volumes.
•
FC: FC ports.
• iSCSI: iSCSI ports.
link-type-
numeric
string Numeric equivalents for link-type values.
• 8: FC WWNN
• 16: FC WWPN
• 64: iSCSI IPv4
• 128: iSCSI IPv6
Table 63 replication-volume properties (continued)
Name Type Description

HP P2000 G3 Specifications

General

Model	P2000 G3
Category	Storage
Drive Support	SAS, SATA
Host Interface	iSCSI, Fibre Channel, SAS
Form Factor	2U
RAID Levels	0, 1, 5, 6, 10
Cache	2 GB
Drive Bays	12 (SFF), 24 (SFF), 12 (LFF)
Cache Memory	2GB per controller
Operating Temperature	10°C to 35°C
Power Supply	Redundant
Expansion Options	Disk Enclosures