HP P2000 G3 Cli Reference Guide

46 Alphabetical list of commands
Restore the original certificate that existed before the custom one was generated:
# create certificate restore
To make the certificate change take effect you must restart both Management
Controllers by entering "restart mc both". Press Enter to acknowledge this
message.
Success: Command completed successfully. - Security certificate restored.
(2012-10-04 09:31:58)
See also • restart mc both
• show certificate

HP P2000 G3 Specifications

General

Model	P2000 G3
Category	Storage
Drive Support	SAS, SATA
Host Interface	iSCSI, Fibre Channel, SAS
Form Factor	2U
RAID Levels	0, 1, 5, 6, 10
Cache	2 GB
Drive Bays	12 (SFF), 24 (SFF), 12 (LFF)
Cache Memory	2GB per controller
Operating Temperature	10°C to 35°C
Power Supply	Redundant
Expansion Options	Disk Enclosures