HP P2000 G3

HP P2000 G3 MSA System CLI Reference Guide 465
Example
# show protocols
...
<OBJECT basetype="security-communications-protocols" name="services-security-protocols"
oid="1" format="pairs">
<PROPERTY name="wbi-http" type="string">Enabled</PROPERTY>
<PROPERTY name="wbi-http-numeric" type="string">1</PROPERTY>
<PROPERTY name="wbi-https" type="string">Enabled</PROPERTY>
<PROPERTY name="wbi-https-numeric" type="string">1</PROPERTY>
<PROPERTY name="cli-telnet" type="string">Enabled</PROPERTY>
<PROPERTY name="cli-telnet-numeric" type="string">1</PROPERTY>
<PROPERTY name="cli-ssh" type="string">Enabled</PROPERTY>
<PROPERTY name="cli-ssh-numeric" type="string">1</PROPERTY>
<PROPERTY name="smis" type="string">Enabled</PROPERTY>
<PROPERTY name="smis-numeric" type="string">1</PROPERTY>
<PROPERTY name="usmis" type="string">Disabled</PROPERTY>
<PROPERTY name="usmis-numeric" type="string">0</PROPERTY>
<PROPERTY name="ftp" type="string">Enabled</PROPERTY>
<PROPERTY name="ftp-numeric" type="string">1</PROPERTY>
<PROPERTY name="snmp" type="string">Enabled</PROPERTY>
<PROPERTY name="snmp-numeric" type="string">1</PROPERTY>
<PROPERTY name="debug-interface" type="string">Enabled</PROPERTY>
<PROPERTY name="debug-interface-numeric" type="string">1</PROPERTY>
<PROPERTY name="inband-ses" type="string">Enabled</PROPERTY>
<PROPERTY name="inband-ses-numeric" type="string">1</PROPERTY>
</OBJECT>
...
debug-interface string • Disabled: The Telnet debug port is disabled. This is the default.
• Enabled: The Telnet debug port is enabled.
debug-
interface-
numeric
string Numeric equivalents for debug-interface values.
• 0: Disabled
• 1: Enabled
inband-ses string • Disabled: The in-band SES interface is disabled.
• Enabled: The in-band SES interface is enabled. This is the default.
inband-ses-
numeric
string Numeric equivalents for inband-ses values.
• 0: Disabled
• 1: Enabled
Table 69 security-communications-protocols properties (continued)
Name Type Description