HP P2000 G3

HP P2000 G3 MSA System CLI Reference Guide 483
Example
# show system-parameters
...
<OBJECT basetype="system-parameters-table" name="system-parameters" oid="1"
format="pairs">
<PROPERTY name="ulp-enabled" type="string">true</PROPERTY>
<PROPERTY name="profiles-enabled" type="string">true</PROPERTY>
<PROPERTY name="max-ports" type="uint32">8</PROPERTY>
<PROPERTY name="max-drives" type="uint32">149</PROPERTY>
<PROPERTY name="max-volumes" type="uint32">1024</PROPERTY>
<PROPERTY name="max-vdisks" type="uint32">32</PROPERTY>
<PROPERTY name="max-luns" type="uint32">1024</PROPERTY>
<PROPERTY name="max-owned-arrays-per-controller" type="uint32">16</PROPERTY>
<PROPERTY name="max-storage-pools-per-controller" type="uint32">1</PROPERTY>
<PROPERTY name="max-capi-arrays" type="uint32">32</PROPERTY>
<PROPERTY name="max-chunk-size" type="uint32">64</PROPERTY>
<PROPERTY name="min-chunk-size" type="uint32">16</PROPERTY>
<PROPERTY name="physical-position-offset" type="uint32">0</PROPERTY>
<PROPERTY name="backoff-percentage" type="uint32">1</PROPERTY>
<PROPERTY name="metadata-size" type="uint32">32768</PROPERTY>
<PROPERTY name="max-host-groups-per-storage-pool" type="uint32">0</PROPERTY>
<PROPERTY name="max-hosts-per-host-group" type="uint32">0</PROPERTY>
<PROPERTY name="max-volume-groups-per-pool" type="uint32">0</PROPERTY>
<PROPERTY name="max-volumes-per-volume-group" type="uint32">0</PROPERTY>
<PROPERTY name="max-snapshot-groups-per-pool" type="uint32">0</PROPERTY>
<PROPERTY name="max-snapshots-per-snapshot-group" type="uint32">0</PROPERTY>
<PROPERTY name="max-midline-per-storage-pool" type="uint32">0</PROPERTY>
<PROPERTY name="max-standard-per-storage-pool" type="uint32">0</PROPERTY>
<PROPERTY name="max-performance-per-storage-pool" type="uint32">0</PROPERTY>
<PROPERTY name="local-controller" type="string">B</PROPERTY>
<PROPERTY name="local-controller-numeric" type="string">0</PROPERTY>
<PROPERTY name="serial-number" type="string">141CF9</PROPERTY>
<PROPERTY name="external-targetid-control" type="string">Disabled</PROPERTY>
<PROPERTY name="external-targetid-control-numeric" type="string">0</PROPERTY>
<PROPERTY name="lan-heartbeat" type="string">Disabled</PROPERTY>
<PROPERTY name="lan-heartbeat-numeric" type="string">0</PROPERTY>
<PROPERTY name="ip-address-mode" type="string">CAPI_TWO_IP_ADDRESSES_MODE</PROPERTY>
<PROPERTY name="ip-address-mode-numeric" type="string">0</PROPERTY>
<PROPERTY name="debug-flags" type="uint32">0831fa3b</PROPERTY>
<PROPERTY name="enclosure-flags" type="uint32">00000005</PROPERTY>
<PROPERTY name="num-global-spares" type="uint32">0</PROPERTY>
<PROPERTY name="dynamic-spare-rescan-rate" type="uint32">0</PROPERTY>
<PROPERTY name="performance-tuning-flags" type="string">Disabled</PROPERTY>
<PROPERTY name="performance-tuning-flags-numeric" type="string">0</PROPERTY>
<PROPERTY name="min-backing-store-size" type="uint32">10485760</PROPERTY>
</OBJECT>
...
performance-
tuning-flags-
numeric
string Numeric equivalents for performance-tuning values.
• 0: Disabled
• 1: Enabled
min-backing-
store-size
uint32 Minimum snap-pool size in blocks.
Table 80 system-parameters-table properties (continued)
Name Type Description