HP P2000 G3

HP P2000 G3 MSA System CLI Reference Guide 485
Example
# show tasks
...
<OBJECT basetype="tasks" name="task" oid="1" format="pairs">
<PROPERTY name="name" key="true" type="string">vd02_v001_task001</PROPERTY>
<PROPERTY name="type" type="string">ReplicateVolume</PROPERTY>
<PROPERTY name="status" type="string">Ready</PROPERTY>
<PROPERTY name="state" type="string">Start</PROPERTY>
<PROPERTY name="error-message" type="string"></PROPERTY>
<PROPERTY name="associated-vdisk-serial" type="string">SN</PROPERTY>
...
</OBJECT>
...
Embedded basetypes
• replicate-volume-tasks
• reset-snapshot-tasks
• snap-tasks
• snapshot-with-retention-tasks
• volume-copy-tasks
• For a ReplicateVolume task:
• Start
• VerifyVolume
• CreateName
• RepVolume
• VerifySnap
• For an EnableDSD or DisableDSD task:
• Start
error-message string Message if an error occurred while processing the task, or blank.
associated-
vdisk-serial
string For a VolumeCopy task, the serial number of the destination vdisk.
Table 81 tasks properties (continued)
Name Type Description