HP P2000 G3

HP P2000 G3 MSA System CLI Reference Guide 513
volume-
qualifier-
numeric
string Numeric equivalents for volume-qualifier values.
• 0: N/A
• 2: RSR
• 6: RSR (DRM Promoted Secondary)
blocks uint64 Unformatted size value in 512-byte blocks.
capabilities string For internal use only.
volume-parent string Parent volume serial number. For example, the serial number of a snapshot’s
master volume.
snap-pool string Snap pool serial number.
replication-set string Replication set serial number.
attributes string Shows whether the volume's disks are single pathed.
virtual-disk-
serial
string Vdisk serial number.
volume-
description
string • For OpenVMS, a numeric value (set with create volume or set volume) that
identifies the volume to an OpenVMS host.
• For HP-UX, a text value (set in-band by a host application) that identifies the
volume.
• Blank by default.
wwn string World Wide Name of the volume, used by host-based Storage Replication
Adapter (SRA) software to identify the volume.
progress string For a volume-copy operation, the percent complete (0%–99%). The default value
is 0%.
progress-
numeric
string Unformatted progress value.
container-name string Vdisk name.
container-
serial
string Vdisk serial number.
health string • OK
• Degraded
• Fault
• Unknown
health-numeric string Numeric equivalents for health values.
• 0: OK
• 1: Degraded
• 2: Fault
• 3: Unknown
health-reason string If Health is not OK, the reason for the health state.
health-
recommendation
string If Health is not OK, the recommended actions to take to resolve the health issue.
Table 95 volumes properties (continued)
Name Type Description