To Next Page

To Previous Page

HP P2000 G3 MSA System CLI Reference Guide 63

replication-mode new-snapshot|last-snapshot

Optional. Specifies whether to replicate a new snapshot of the volume to the remote system, or to

replicate the last (most recent existing) snapshot of the volume to the remote system.

• new-snapshot: Replicate a new snapshot.

• last-snapshot: Replicate the most recent existing snapshot.

If this parameter is omitted, a new snapshot is replicated.

name

A name for the new task. The name is case sensitive; cannot include a comma, double quote, left

angle bracket, or backslash; and can have a maximum of 32 bytes. A name that includes a space

must be enclosed in double quotes.

Example Create task Snap that takes a snapshot of master volume VD1_V1 and retains only the latest four

snapshots with the prefix VD1_V1 (e.g., VD1_V1_S0001):

# create task type TakeSnapshot source-volume VD1_V1 snapshot-prefix VD1_V1

retention-count 4 Snap

Success: Command completed successfully. (Snap) - The task was created.

(2012-01-19 15:45:10)

Create task Reset that resets snapshot VD1_V1_S0001:

# create task type ResetSnapshot snapshot-volume VD1_V1_S0001 Reset

Success: Command completed successfully. (Reset) - The task was created.

(2012-01-19 15:46:21)

Create task Copy that copies volume VD1_V1 to vdisk VD2 with name C_V0001:

# create task type VolumeCopy source-volume VD1_V1 dest-vdisk VD2 dest-prefix C

modified-snapshot yes Copy

Success: Command completed successfully. (Copy) - The task was created.

(2012-01-19 15:46:33)

Create task Replicate that replicates primary volume VD1_V2:

# create task type ReplicateVolume source-volume VD1_V2 snapshot-prefix VD1_V2

retention-count 4 Replicate

Success: Command completed successfully. (Replicate) - The task was created.

(2012-01-19 15:46:58)

Create a task to enable or resume spin down for all disks:

# create task type EnableDSD taskDSDresume

Success: Command completed successfully. (taskDSDresume) - The task was created.

(2012-01-19 15:47:04)

Create a task to disable or suspend spin down for all disks:

# create task type DisableDSD taskDSDsuspend

Success: Command completed successfully. (taskDSDsuspend) - The task was

created. (2012-01-19 15:47:15)

HP P2000 G3 Cli Reference Guide

Other manuals for HP P2000 G3