HP ProCurve 5400zl

■ [no] spanning-tree pending instance < 1 to 16 >
ID of the MST instance to congure.
Range: < 1 to 16 >
Next Available Option:
■ vlan -- Configure VLANs for the MST instance.(p. 653)
path-cost
■ spanning-tree [ETHERNET] PORT-LIST path-cost
Set port's path cost value.
Next Available Options:
■ path-cost < 1 to 200000000 > -- Set port's path cost to the fixed value.(p. 646)
■ path-cost < 1 to 65535 > -- Set port's path cost to the fixed value.(p. 646)
■ auto -- Use dynamic method of selecting a value for the path cost.(p. 641)
■ spanning-tree [ETHERNET] PORT-LIST path-cost < 1 to 200000000 >
Set port's path cost to the xed value.
Range: < 1 to 200000000 >
■ spanning-tree [ETHERNET] PORT-LIST path-cost < 1 to 65535 >
Set port's path cost to the xed value.
Range: < 1 to 65535 >
■ spanning-tree [ETHERNET] PORT-LIST path-cost
Set port's path cost value.
Next Available Options:
■ path-cost < 1 to 200000000 > -- Set port's path cost to the fixed value.(p. 646)
■ path-cost < 1 to 65535 > -- Set port's path cost to the fixed value.(p. 646)
■ auto -- Use dynamic method of selecting a value for the path cost.(p. 641)
■ spanning-tree [ETHERNET] PORT-LIST path-cost < 1 to 200000000 >
Set port's path cost to the xed value.
Range: < 1 to 200000000 >
■ spanning-tree [ETHERNET] PORT-LIST path-cost < 1 to 65535 >
Set port's path cost to the xed value.
Range: < 1 to 65535 >
■ spanning-tree instance ist [ETHERNET] PORT-LIST path-cost
Set the internal port pathcost for the IST (default is 'auto').
646© 2009 Hewlett-Packard Development Company, L.P.
spanning-treeCommand Line Interface Reference Guide