Server Configuration and Utilities
· Integrated Diskette Controller enables or disables the diskette drive. When
disabled, Diskette Write Control, Diskette Boot Control, and IPL Boot Order
are irrelevant.
Embedded NIC Port 1 PXE Support enables the Pre-boot Execution
Environment (PXE) support for NIC Port 1. The Embedded NIC Port PXE
Support option allows the server to boot to the network and attach to a PXE
server with boot images. When enabled, the NIC port is displayed in the Initial
Program Loader (IPL) list.
·
·
·
·
·
Diskette Write Control allows you to configure the write control of the diskette
drive. It can be set to read and write or to read only.
Diskette Boot Control enables you to have the server boot from the removable
media device.
Embedded LPT Port allows you to enable the embedded LPT Port at the
specified resource settings or to disable the option.
NumLock Power-On State enables or disables the power-up state of the
NumLock key.
PCI Devices
The PCI Devices option displays and modifies the configuration of the PCI devices
installed in the server. Information for each slot is displayed and the IRQs can be
changed. Multiple PCI devices can share an interrupt.
Standard Boot Order (IPL)
The Standard Boot Order (IPL) option configures the Initial Program Loader (IPL)
device. It controls the search order the server goes through to look for a bootable
device.
Boot Controller Order
The Boot Controller Order option is used to view and assign the current controller
order.
5-4 HP ProLiant ML310 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Ted Weiman File Name: f-ch5.doc
Codename: Son of Beast Part Number: 274431-002 Last Saved On: 11/22/02 2:03 PM
To Next Page
Loading...
Need help?
General
