LED Indicators, Switches, and Jumpers
Switch Settings
The server contains two switchbanks. This section explains the use of each reserved
and nonreserved switch.
System Configuration Switch Settings
The system configuration switchbank is located on the system board. Some switches
are reserved for use by authorized service providers and must not be changed unless
instructed otherwise.
12345678
on
Figure E-4: System configuration switch default
settings
E-8 HP ProLiant ML310 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Ted Weiman File Name: l-appe.doc
Codename: Son of Beast Part Number: 274431-002 Last Saved On: 11/22/02 2:10 PM
To Next Page
Loading...
