HP ProLiant ML310 Setup And Installation Guide

Server Configuration and Utilities
ROM-Based Setup Utility
RBSU performs a wide range of configuration activities, including the following:
Configuring server devices and installed options ·
·
·
·
·
·
·
·
·
Viewing server information
Selecting the operating system
Selecting the primary boot controller
In addition, RBSU includes other features, which are outlined in “Using RBSU” in
this chapter.
For information on RBSU not found in this guide, refer to the HP ROM-Based Setup
Utility User Guide found in the ProLiant Essentials Foundation Pack.
Navigating RBSU
To make selections within RBSU, use the following keys:
You can access RBSU by pressing the F9 key when prompted during startup.
The arrow keys navigate through the menu system.
Selections are made by pressing the Enter key.
Selections are cancelled by pressing the Escape key.
Selections and changes are saved by pressing the F10 key.
5-2 HP ProLiant ML310 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Ted Weiman File Name: f-ch5.doc
Codename: Son of Beast Part Number: 274431-002 Last Saved On: 11/22/02 2:03 PM

HP ProLiant ML310 Specifications

General

Form Factor	Tower
Processor Sockets	1
Maximum Memory	32GB
Memory Slots	4
Storage Controller	HP Dynamic Smart Array B120i
Processor	Intel Xeon E3-1200 series
Memory Type	DDR3
RAID Support	RAID 0, 1, 10
Storage	Up to 4 LFF (3.5-inch) drives
Hard Drive Interface	SATA
Network	1Gb Ethernet
Power Supply	350W
Operating System Support	Red Hat Enterprise Linux, SUSE Linux Enterprise Server
Expansion Slots	1 x PCIe 2.0 x1