LED Indicators, Switches, and Jumpers
Table E-4: System Configuration Switch Settings
CAUTION: Clearing nonvolatile RAM (NVRAM) deletes the
system configuration. Refer to Chapter 5, “Server Configuration
and Utilities,” for instructions on configuring the server.
Position Default Description Settings
1 Off Reserved N/A
2 Off Lock configuration Off = Normal operation
On = Configuration
changes cannot be
made
3 Off Tower/rack
configuration
Off = Tower
configuration
On = Rack configuration
4 Off Diskette boot Off = Observe RBSU
diskette boot selection
On = Override RBSU
diskette boot selection
and allow boot to
diskette
5 Off Password override Off = Normal
On = Override password
prompts
6 Off Clear CMOS and
NVRAM
Off = Normal
On = When the server is
powered up, all system
configuration
information is erased
7 Off Reserved N/A
8 Off Reserved N/A
Note: Switch positions 1, 7, and 8 are reserved for authorized service
providers only. Do not change the specified default setting for these
positions, unless instructed otherwise.
HP ProLiant ML310 Server Setup and Installation Guide E-9
HP CONFIDENTIAL
Writer: Ted Weiman File Name: l-appe.doc
Codename: Son of Beast Part Number: 274431-002 Last Saved On: 11/22/02 2:10 PM
To Next Page
Loading...
Need help?
General
