Server Configuration and Utilities
Using RBSU
NOTE: Most of the features in RBSU are not required in the setup of the server. The options
in this utility are designed to assist with specific server configuration issues.
RBSU is separated into a series of menu selections designed to configure specific
areas of the server. The primary menus are as follows:
System Options ·
·
·
·
·
·
·
·
·
·
·
·
·
PCI Devices
Standard Boot Order (IPL)
Boot Controller Order
Date and Time
Automatic Server Recovery (ASR)
Server Passwords
Server Asset Text
Advanced Options
Utility Language
System Options
The System Options menu configures the basic input/output (I/O) of the server and
sets the operating system. The configuration options include the operating system, the
external ports, and the ability to control the diskette drive. The following is a list of
selections found on this menu with an explanation of each option:
OS Selection selects the primary operating system for the server. Default server
settings are automatically set based on the operating system selected.
Serial Number allows you to change the serial number, though HP does not
recommend changing it.
Embedded COM Port X sets the configuration for the internal serial port A or
B. The configuration options include the address and interrupt request (IRQ).
This option can also disable the port.
HP ProLiant ML310 Server Setup and Installation Guide 5-3
HP CONFIDENTIAL
Writer: Ted Weiman File Name: f-ch5.doc
Codename: Son of Beast Part Number: 274431-002 Last Saved On: 11/22/02 2:03 PM
To Next Page
Loading...
Need help?
General
