EasyManuals Logo

HP ProLiant ML310 Setup And Installation Guide

HP ProLiant ML310
170 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #133 background imageLoading...
Page #133 background image
Troubleshooting
When the Server Does Not Start
This section provides step-by-step instructions when encountering the most common
problems during the initial Power-On Self-Test (POST). Every time the server boots,
it must complete POST before it can load the operating system and start running
software applications.
If the server completes POST and attempts to load the operating system, go to
“Problems After Initial Startup” in this appendix.
WARNING: There is a risk of personal injury from hazardous energy levels.
The installation of options and the routine maintenance and service of this
product must be performed by individuals who are knowledgeable about the
procedures, precautions, and hazards associated with equipment containing
hazardous energy circuits.
When the server does not start:
1. Be sure that the server and monitor are plugged into a working outlet.
2. Be sure that the power source is working properly:
Check the status using the Power On/Standby LED.
Refer to “Server LEDs” in Appendix E for the location and status of the
Power On/Standby LED.
Be sure that the Power On/Standby switch was pressed firmly.
Refer to the Servers Troubleshooting Guide for details on what else to check.
3. If the server does not complete POST, or it does complete POST but does not
load the operating system, refer to the Servers Troubleshooting Guide.
NOTE: If the server is rebooting repeatedly, be sure that the server is not restarting due to an
Automatic Server Recovery (ASR) power-up caused by another problem. Check Insight
Manager for notification of this event. Refer to the Servers Troubleshooting Guide for more
information.
HP ProLiant ML310 Server Setup and Installation Guide D-3
HP CONFIDENTIAL
Writer: Ted Weiman File Name: k-appd.doc
Codename: Son of Beast Part Number: 274431-002 Last Saved On: 11/22/02 2:09 PM

Table of Contents

Other manuals for HP ProLiant ML310

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP ProLiant ML310 and is the answer not in the manual?

HP ProLiant ML310 Specifications

General IconGeneral
Form FactorTower
Processor Sockets1
Maximum Memory32GB
Memory Slots4
Storage ControllerHP Dynamic Smart Array B120i
ProcessorIntel Xeon E3-1200 series
Memory TypeDDR3
RAID SupportRAID 0, 1, 10
StorageUp to 4 LFF (3.5-inch) drives
Hard Drive InterfaceSATA
Network1Gb Ethernet
Power Supply350W
Operating System SupportRed Hat Enterprise Linux, SUSE Linux Enterprise Server
Expansion Slots1 x PCIe 2.0 x1

Related product manuals