HP ProLiant ML310 Setup And Installation Guide

Troubleshooting
This appendix includes the following topics:
When the Server Does Not Start—You are provided with step-by-step
instructions on what to try and where to go for help with the most common
problems encountered during initial Power-On Self-Test (POST). A successful
startup requires the server to complete this test each time you power up, before
the server can load the operating system and start running software applications.
·
·
·
Problems After Initial Startup—After the server has passed POST, you may
still encounter errors, such as an inability to load the operating system. You are
provided with instructions on what to try and where to go for help when you
encounter errors after the server completes POST.
Other Information Resources—This section provides a list of references for
troubleshooting beyond the scope of this guide.
D-2 HP ProLiant ML310 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Ted Weiman File Name: k-appd.doc
Codename: Son of Beast Part Number: 274431-002 Last Saved On: 11/22/02 2:09 PM

HP ProLiant ML310 Specifications

General

Form Factor	Tower
Processor Sockets	1
Maximum Memory	32GB
Memory Slots	4
Storage Controller	HP Dynamic Smart Array B120i
Processor	Intel Xeon E3-1200 series
Memory Type	DDR3
RAID Support	RAID 0, 1, 10
Storage	Up to 4 LFF (3.5-inch) drives
Hard Drive Interface	SATA
Network	1Gb Ethernet
Power Supply	350W
Operating System Support	Red Hat Enterprise Linux, SUSE Linux Enterprise Server
Expansion Slots	1 x PCIe 2.0 x1