HP ProLiant ML310 Setup And Installation Guide

Server Features
Table 1-5: SCSI System Board Components
Item Component Item Component
1 Power supply connectors 14 64-bit PCI expansion slot 1
2 Power switch assembly connector 15 NMI switch
3 Diskette drive connector 16 System fan connector
4 IDE connector (ATAPI devices) 17 CPU fan connector
5 DIMM slots 18 Processor socket
6 CR2032 battery 19 Keyboard connector
7 SCSI connector 20 Mouse connector
8 System configuration switch 21 Parallel port connector
9 RIB 30-pin header 22 Serial port connector B
10 System ID switch 23 Serial port connector A
11 64-bit PCI expansion slot 4 24 Video connector
12 64-bit PCI expansion slot 3 25 RJ-45 Ethernet connector
13 64-bit PCI expansion slot 2 26 USB port connectors (2)
Note: For information on system board LEDs and system configuration switch settings, refer to
Appendix E, “LED Indicators, Switches, and Jumpers.”
HP ProLiant ML310 Server Setup and Installation Guide 1-9
HP CONFIDENTIAL
Writer: Ted Weiman File Name: b-ch01.doc
Codename: Son of Beast Part Number: 274431-002 Last Saved On: 11/22/02 1:53 PM

HP ProLiant ML310 Specifications

General

Form Factor	Tower
Processor Sockets	1
Maximum Memory	32GB
Memory Slots	4
Storage Controller	HP Dynamic Smart Array B120i
Processor	Intel Xeon E3-1200 series
Memory Type	DDR3
RAID Support	RAID 0, 1, 10
Storage	Up to 4 LFF (3.5-inch) drives
Hard Drive Interface	SATA
Network	1Gb Ethernet
Power Supply	350W
Operating System Support	Red Hat Enterprise Linux, SUSE Linux Enterprise Server
Expansion Slots	1 x PCIe 2.0 x1