HP ProLiant ML310 Setup And Installation Guide

Server Features
Server features include the following:
Intel Pentium 4 processor ·
·
·
·
·
·
·
·
·
·
·
·
·
ECC Registered PC2100 DDR SDRAM DIMM, upgradable to 4 GB
Capacity for:
— Five 36.4-GB non-hot-plug SCSI hard drives for a maximum of 182 GB of
internal storage
— Four 80-GB ATA hard drives for a maximum of 320 GB of internal storage
— Three 36.4-GB non-hot-plug SCSI hard drives and two 72.8-GB hot-plug
hard drives in the internal two-bay hot-plug SCSI drive cage option for a
maximum of 254 GB of internal storage
Four removable media bays (three available)
IDE CD-ROM drive
3.5-inch diskette drive
Four 33-MHz 64-bit PCI slots
Integrated single-channel Wide Ultra3 SCSI controller or an integrated
dual-channel ATA/100 RAID controller
NC7760 Gigabit Server network interface controller (NIC)
Integrated ATI Rage XL video controller
CE Mark-compliant PFC 300W power supply
Support for HP, Compaq branded, and most third-party racks, with the optional
rack-enabling kit
Support for telco racks, with the optional rack-enabling kit and optional telco rail
kit
1-2 HP ProLiant ML310 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Ted Weiman File Name: b-ch01.doc
Codename: Son of Beast Part Number: 274431-002 Last Saved On: 11/22/02 1:53 PM

HP ProLiant ML310 Specifications

General

Form Factor	Tower
Processor Sockets	1
Maximum Memory	32GB
Memory Slots	4
Storage Controller	HP Dynamic Smart Array B120i
Processor	Intel Xeon E3-1200 series
Memory Type	DDR3
RAID Support	RAID 0, 1, 10
Storage	Up to 4 LFF (3.5-inch) drives
Hard Drive Interface	SATA
Network	1Gb Ethernet
Power Supply	350W
Operating System Support	Red Hat Enterprise Linux, SUSE Linux Enterprise Server
Expansion Slots	1 x PCIe 2.0 x1