Hardware Options Installation
HP ProLiant ML310 Server Setup and Installation Guide 3-39
HP CONFIDENTIAL
Writer: Ted Weiman File Name: d-ch3.doc
Codename: Son of Beast Part Number: 274431-002 Last Saved On: 11/22/02 1:58 PM
IMPORTANT: Positive polarity (+) should be positioned out.
5. Replace the access panel and front bezel, and connect the power cables to the
server.
6. Run RBSU to reconfigure the server by pressing the F9 key when prompted
during server startup. Refer to Chapter 5, “Server Configuration and Utilities,” or
the HP ROM-Based Setup Utility User Guide, for more information on RBSU.
To Next Page
Loading...
