HP VSR1000 Configuration Guide

266
Configuration prerequisites
Before you apply an IPsec policy for RIPng, complete following tasks:
• Create an IPsec proposal.
• Create an IPsec policy.
For more information about IPsec policy configuration, see Security Configuration Guide.
Configuration guidelines
An IPsec policy used for RIPng can only be in manual mode. For more information, see Security
Configuration Guide.
Configuration procedure
To apply an IPsec policy in a process:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter RIPng view.
ripng [ process-id ] [ vpn-instance
vpn-instance-name ]
N/A
3. Apply an IPsec policy in the
process.
enable ipsec-policy policy-name Not configured by default.
To apply an IPsec policy on an interface:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter interface view.
interface interface-type
interface-number
N/A
3. Apply an IPsec policy on the
interface.
ripng ipsec-policy policy-name Not configured by default.
Displaying and maintaining RIPng
Task Command Remarks
Display configuration information
of a RIPng process.
display ripng [ process-id |
vpn-instance vpn-instance-name ]
[ | { begin | exclude | include }
regular-expression ]
Available in any view
Display routes in the RIPng
database.
display ripng process-id database
[ | { begin | exclude | include }
regular-expression ]
Available in any view
Display the routing information of
a specified RIPng process.
display ripng process-id route [ |
{ begin | exclude | include }
regular-expression ]
Available in any view

HP VSR1000 Specifications

General

Brand	HP
Model	VSR1000
Category	Network Router
Language	English