EasyManuals Logo

HP VSR1000 Configuration Guide

HP VSR1000
453 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #375 background imageLoading...
Page #375 background image
362
Ste
p
Command
Remarks
2. Define an IPv6
prefix list.
ip ipv6-prefix ipv6-prefix-name [ index index-number ]
{ deny | permit } ipv6-address prefix-length
[ greater-equal min-prefix-length ] [ less-equal
max-prefix-length ]
Not defined by default.
If all items are set to the deny mode, no routes can pass the IPv6 prefix list. You must define the permit ::
0 less-equal 128 item following multiple deny items to allow other IPv6 routing information to pass.
For example, the following configuration filters routes 2000:1::/48, 2000:2::/48, and 2000:3::/48,
but allows other routes to pass.
<Sysname> system-view
[Sysname] ip ipv6-prefix abc index 10 deny 2000:1:: 48
[Sysname] ip ipv6-prefix abc index 20 deny 2000:2:: 48
[Sysname] ip ipv6-prefix abc index 30 deny 2000:3:: 16
[Sysname] ip ipv6-prefix abc index 40 permit :: 0 less-equal 128
Defining an AS path list
You can define multiple items for an AS path list that is identified by number. The relationship between
items is logical OR. If a route matches one of these items, it passes the AS path list.
To define an AS path list:
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Define an AS path list.
ip as-path as-path-number { deny |
permit } regular-expression
Not defined by default.
Defining a community list
You can define multiple items for a community list that is identified by number. During matching, the
relationship between items is logic OR. If routing information matches one of these items, it passes the
community list.
To define a community list:
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Define a community list.
• Define a basic community list:
ip community-list { basic-comm-list-num |
basic comm-list-name } { deny | permit }
[ community-number-list ] [ internet |
no-advertise | no-export |
no-export-subconfed ] *
• Define an advanced community list:
ip community-list { adv-comm-list-num |
advanced comm-list-name } { deny | permit }
regular-expression
Use either approach.
Not defined by
default.

Table of Contents

Other manuals for HP VSR1000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP VSR1000 and is the answer not in the manual?

HP VSR1000 Specifications

General IconGeneral
BrandHP
ModelVSR1000
CategoryNetwork Router
LanguageEnglish

Related product manuals