HP VSR1000 Configuration Guide

329
Ste
p
Command Remarks
4. Enable default route redistribution into
the IPv6 BGP routing table.
default-route imported
Optional.
Not enabled by default.
If the default-route imported
command is not configured,
using the import-route command
cannot redistribute any IGP
default route.
5. Enable route redistribution from
another routing protocol.
import-route protocol
[ process-id [ med med-value
| route-policy
route-policy-name ] * ]
Not enabled by default.
Configuring IPv6 BGP route summarization
To reduce the routing table size on medium and large BGP networks, configure route summarization on
BGP routers. BGP supports only manual summarization of IPv6 routes.
To configure IPv6 BGP route summarization:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view.
bgp as-number N/A
3. Enter IPv6 address
family view.
ipv6-family N/A
4. Configure manual
route summarization.
aggregate ipv6-address prefix-length [ as-set |
attribute-policy route-policy-name |
detail-suppressed | origin-policy route-policy-name
| suppress-policy route-policy-name ] *
Not configured by
default.
Advertising a default route to an IPv6 peer or peer group
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view.
bgp as-number N/A
3. Enter IPv6 address family
view.
ipv6-family N/A

HP VSR1000 Specifications

General

Brand	HP
Model	VSR1000
Category	Network Router
Language	English