EasyManuals Logo

HP VSR1000 Configuration Guide

HP VSR1000
453 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #343 background imageLoading...
Page #343 background image
330
Ste
p
Command
Remarks
4. Advertise a default route to
an IPv6 peer or peer
group.
peer { ipv6-group-name | ipv6-address }
default-route-advertise [ route-policy
route-policy-name ]
Not advertised by default.
With the peer
default-route-advertise
command executed, the
local router advertises a
default route with itself as
the next hop to the specified
IPv6 peer or peer group,
regardless of whether the
default route is available in
the routing table.
Configuring outbound route filtering
IPv6 BGP advertises routes passing the specified policy to peers. Using the protocol argument can filter
only the routes redistributed from the specified protocol. If no protocol is specified, IPv6 BGP filters all
routes to be advertised, including redistributed routes and routes imported with the network command.
To configure outbound route filtering:
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view.
bgp as-number N/A
3. Enter IPv6 address family
view.
ipv6-family
N/A
4. Configure the filtering of
outgoing routes.
filter-policy { acl6-number | ipv6-prefix
ipv6-prefix-name } export [ protocol
process-id ]
Not configured by default.
5. Apply a routing policy to
routes advertised to an IPv6
peer or peer group.
peer { ipv6-group-name | ipv6-address }
route-policy route-policy-name export
Not applied by default.
6. Specify an IPv6 ACL to filter
routes advertised to an IPv6
peer or peer group.
peer { ipv6-group-name | ipv6-address }
filter-policy acl6-number export
Not specified by default.
7. Specify an AS path list to filter
routes advertised to an IPv6
peer or peer group.
peer { ipv6-group-name | ipv6-address }
as-path-acl as-path-acl-number export
Not specified by default.
8. Specify an IPv6 prefix list to
filter routes advertised to an
IPv6 peer or peer group.
peer { ipv6-group-name | ipv6-address }
ipv6-prefix ipv6-prefix-name export
Not specified by default.
Configuring inbound route filtering
Only routes passing the configured filtering can be added into the local IPv6 BGP routing table.
Members of a peer group can have different inbound route filtering policies.

Table of Contents

Other manuals for HP VSR1000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP VSR1000 and is the answer not in the manual?

HP VSR1000 Specifications

General IconGeneral
BrandHP
ModelVSR1000
CategoryNetwork Router
LanguageEnglish

Related product manuals