345
Task Command
Remarks
Reset IPv6 BGP
connections.
reset bgp ipv6 { as-number | ipv4-address | ipv6-address | all |
external | group group-name | internal }
Available in
user view
Clearing IPv6 BGP information
Task Command
Remarks
Clear dampened IPv6 BGP routing
information and release suppressed
routes.
reset bgp ipv6 dampening [ ipv6-address
prefix-length ]
Available in
user view
Clear IPv6 BGP route flap information.
reset bgp ipv6 flap-info
[ ipv6-address/prefix-length | as-path-acl
as-path-acl-number | regexp as-path-regexp ]
reset bgp ipv6 peer-ipv6-address flap-info
Available in
user view
IPv6 BGP configuration examples
Some examples for IPv6 BGP configuration are similar to those of BGP4. For more information, see
"Configuring BGP."
IPv6 BGP basic configuration example
Network requirements
All switches in Figure 116 run IPv6 BGP. Between Switch A and Switch B is an EBGP connection. Switch
B, Switch C, and Switch D are fully meshed through IBGP connections.
Figure 116 Network diagram
Configuration procedure
1. Configure IPv6 addresses for interfaces. (Details not shown.)
2. Configure IBGP connections:
# Configure Switch B.
<SwitchB> system-view
To Next Page
Loading...
Need help?
General
