365
Ste
Command
Remarks
5. Match BGP routing information whose
AS_PATH attribute is specified in the AS
path lists.
if-match as-path
AS-PATH-number&<1-16>
Optional.
Not configured by
default.
6. Match BGP routing information whose
COMMUNITY attribute is specified in the
community lists.
if-match community
{ { basic-community-list-number |
comm-list-name } [ whole-match ] |
adv-community-list-number }&<1-16>
Optional.
Not configured by
default.
7. Match routes having the specified cost.
if-match cost value
Optional.
Not configured by
default.
8. Match BGP routing information whose
extended community attribute is specified
in the extended community lists.
if-match extcommunity
ext-comm-list-number&<1-16>
Optional.
Not configured by
default.
9. Match routing information having
specified outbound interfaces.
if-match interface { interface-type
interface-number }&<1-16>
Optional.
Not configured by
default.
10. Match routing information having the
specified route type.
if-match route-type { external-type1 |
external-type1or2 | external-type2 |
internal | is-is-level-1 | is-is-level-2 |
nssa-external-type1 |
nssa-external-type1or2 |
nssa-external-type2 } *
Optional.
Not configured by
default.
11. Match RIP, OSPF, and IS-IS routing
information having the specified tag
value.
if-match tag value
Optional.
Not configured by
default.
Defining apply clauses
Ste
Command
Remarks
1. Enter system view.
system-view N/A
2. Enter routing policy view.
route-policy route-policy-name
{ deny | permit } node node-number
Not created by default.
3. Set the AS_PATH attribute for
BGP routing information.
apply as-path as-number&<1-10>
[ replace ]
Optional.
Not set by default.
4. Delete the COMMUNITY
attribute of BGP routing
information using the
community list.
apply comm-list { comm-list-number
| comm-list-name } delete
Optional.
Not configured by default.
5. Set the COMMUNITY attribute
for BGP routing information.
apply community { none | additive
| { community-number&<1-16> |
aa:nn&<1-16> | internet |
no-advertise | no-export |
no-export-subconfed } *
[ additive ] }
Optional.
Not set by default.