417
127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0
192.168.0.0/24 BGP 255 2 30.1.1.1 Vlan30
# Perform similar configuration on the MCE and PE 1 for VPN 2. Redistribute the OSPF routes of
VPN instance vpn2 into the EBGP routing table. (Details not shown.)
The following output shows that PE 1 has learned the private route of VPN 2 through BGP:
[PE1] display ip routing-table vpn-instance vpn2
Routing Tables: vpn2
Destinations : 5 Routes : 5
Destination/Mask Proto Pre Cost NextHop Interface
40.1.1.0/24 Direct 0 0 40.1.1.2 Vlan40
40.1.1.2/32 Direct 0 0 127.0.0.1 InLoop0
127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0
127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0
192.168.10.0/24 BGP 255 2 40.1.1.1 Vlan40
Now, the MCE has redistributed the OSPF routes of the two VPN instances into the EBGP routing
tables of PE 1.
To Next Page
Loading...
Need help?
General
