HP VSR1000 Configuration Guide

83
Ste
p
Command Remarks
3. Configure OSPF to
redistribute routes from
another protocol.
import-route protocol [ process-id |
all-processes | allow-ibgp ] [ cost cost | type
type | tag tag | route-policy
route-policy-name ] *
Not configured by default
4. Configure OSPF to filter
redistributed routes before
advertisement.
filter-policy { acl-number | ip-prefix
ip-prefix-name } export [ protocol
[ process-id ] ]
Optional
Not configured by default
Configuring OSPF to redistribute a default route
Using the import-route command cannot redistribute a default external route. To do so, you must use the
default-route-advertise command.
To configure OSPF to redistribute a default external route:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter OSPF view.
ospf [ process-id | router-id router-id |
vpn-instance vpn-instance-name ] *
N/A
3. Redistribute a default
route.
default-route-advertise [ [ [ always |
permit-calculate-other ] | cost cost |
route-policy route-policy-name | type type ]
* | summary cost cost ]
Not redistributed by default.
The default-route-advertise
summary cost command is
applicable only to VPN, and
the default route is
redistributed in a Type-3 LSA.
The PE router advertises the
default route to the CE router.
Configuring the default parameters for redistributed routes
You can configure default parameters, such as the cost, upper limit, tag and type for redistributed routes.
Tags indicate information related to protocols. For example, when redistributing BGP routes, OSPF uses
tags to identify AS IDs.
To configure the default parameters for redistributed routes:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter OSPF view.
ospf [ process-id | router-id router-id |
vpn-instance vpn-instance-name ] *
N/A

HP VSR1000 Specifications

General

Brand	HP
Model	VSR1000
Category	Network Router
Language	English