HPE FlexNetwork MSR Series - Page 133

127
V.24 (RS232)
V.35
38400 20 m 65.6 ft) 38400 78 m (255.9 ft)
64000 20 m (65.6 ft) 56000 60 m (196.9 ft)
115200 10 m (32.8 ft) 64000 50 m (164 ft)
— — 2048000 30 m (98.4 ft)
NOTE:
When a V.24 cable is used,
make sure the baud rate of the FIC-SA in synchronous mode does
not
exceed 64 Kbps.
Interface specifications
Table 205 Interface specifications
Item
Specification
Synchronous
Asynchronous
Connector D28
Number of connectors
2 (FIC-2SAE)
4 (FIC-4SAE)
8 (FIC-8SAE)
Interface standard and
operating mode
V.24
V.35, RS449, X.21,
RS530
RS232
DTE,
DCE
DTE DCE
Min. baud rate(bps) 1200 1200 300
Max. baud rate(bps) 64 k 4.096 M 2.048 M 115.2
Cable
• V.24 (RS232) DTE cable
• V.24 (RS232) DCE cable
• V.35 DTE cable
• V.35 DCE cable
• X.21 DTE cable
• X.21 DCE cable
• RS449 DTE cable
• RS449 DCE cable
• RS530 DTE cable
• RS530 DCE cable
Supported service
• DDN leased line
• Terminal access service
• Dialup through modem
• Backup
• Asynchronous leased line
• Terminal access service