HPE FlexNetwork MSR Series - MIM-2 Sae;MIM-4 Sae;MIM-8 Sae

66
• MIM-4SAE
• MIM-8SAE
• MIM-8ASE
• MIM-16ASE
MIM-2SAE/MIM-4SAE/MIM-8SAE
Introduction
The 2/4/8-port enhanced high-speed synchronous/asynchronous serial interface module
(MIM-2SAE/MIM-4SAE/MIM-8SAE) functions the same as SA modules except that the SAE
modules support additional protocols, for example, RS449, X.21, and RS530.
Interface specifications
Table 103 Interface specifications
Item
Specification
Synchronous
Asynchronous
Connector D28
Number of connectors
2 (MIM-2SAE)
4 (MIM-4SAE)
8 (MIM-8SAE)
Interface standard and
operating mode
V.24
V.35, RS449, X.21,
RS530
RS232
DTE, DCE DTE, DCE
Minimum baud rate
(bps)
1200 1200 300
Maximum baud rate
(bps)
64 k 2.048 M 115.2
Cable
• V.24 (RS232) DTE cable
• V.24 (RS232) DCE cable
• V.35 DTE cable
• V.35 DCE cable
• X.21 DTE cable
• X.21 DCE cable
• RS449 DTE cable
• RS449 DCE cable
• RS530 DTE cable
• RS530 DCE cable
Supported service
• DDN leased line
• Terminal access service
• Dialup through modems
• Backup
• Asynchronous leased line
• Dumb terminal access