51
Interface LEDs
Figure 52 MIM-2FE panel
Figure 53 MIM-4FE panel
Table 78 LED description
LINK
• Off means the Ethernet link is not connected.
• On means the link is connected.
ACTIVE
• Off means no data is being transmitted or received;
• Flashing means data is being received or/and transmitted.
Interface cables and connection methods
For more information about the Ethernet interface cables and connection methods, see "Ethernet
interface."
MIM-2GBE
Introduction
The 2-port 10Base-T/100Base-TX/1000Base-T Ethernet electrical interface module completes the
communication between a router and a LAN.
Interface specifications
Table 79 Interface specifications
Connector RJ-45
Number of connectors 2
Interface type MDI/MDIX
Interface standard 802.3, 802.3u, 802.3ab
Transmission distance
100 m (328.08 ft) over category-5 twisted pair cables (both crossover
and straight-through)
Operating mode 10/100/1000 Mbps auto-sensing, half/full duplex
Interface LEDs
Figure 54 MIM-2GBE
To Next Page
Loading...
Need help?
General
