HPE FlexNetwork MSR Series Guide

174
Product
number
Description Cable Appearance
Applicable
models
JD508A
HPE X260
Auxiliary Router
Cable
AUX cable
1 × D25 & 1 × D9 < ---- > 1 ×
RJ45
Table 253 Detailed specifications for the SIC-3G-GSM/SIC-3G-HSPA / SIC-3G-HSPA+
interface module antenna
Item
Description
Frequency scope 824-960 MHz/1710-2170 MHz
Voltage standing wave ratio ≤ 2
Input impedance 50 Ω
Gain 1.5 dBi
Polarization type Vertical
Maximum input power 10 W
Interface TNC-Male
Lightning protection Direct current grounding
Height 153 mm (6.02 in)
Weight 26 g (0.92 oz)
Length None
Color Black
Operation temperature –30 °C to 60 °C (–22°F to 140°F)
Connecting a SIC-3G-GSM/SIC-3G-HSPA / SIC-3G-HSPA+ interface module antenna
1. To install an antenna, adjust the angle of the antenna to 180º.
2. Fasten the antenna onto the antenna port that has a MAIN mark. Avoid over-tightening. Make
sure the antenna is vertical to the ground or ceiling to achieve the optimal coverage.
Connecting a SIC-3G-GSM/SIC-3G-HSPA / SIC-3G-HSPA+ interface debug antenna
1. Connect the RJ-45 interface of the AUX cable to the Diag Port interface.
2. Connect the D25/D9 connector to a peer device, which is typically a PC.

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English