HPE ProLiant Gen9 - Page 259

OA: Mismatching I/O condition resolved, Blade [value:bladeNumber], interconnect
[value] was removed.
OA: Mismatching I/O was removed on Blade [value:bladeNumber], Mezzanine Card
[value], Port [value].
OA: Mismatching I/O was removed on Interconnect [value], Port [value].
Log type: LOG_NOTICE, Failure type: HW
OA: AC Subsystem Overload - FAILED. Redundant Power: [value]W DC, Present Power
[value]W AC.
OA: Blade [value:bladeNumber] Ambient Temperature Cable fault...state is
CRITICAL.
OA: Blade [value:bladeNumber] Ambient Temperature Cable fault...state is
DEGRADED.
OA: Blade [value:bladeNumber] Ambient Temperature caution...state is CRITICAL.
OA: Blade [value:bladeNumber] Ambient Temperature caution...state is DEGRADED.
OA: Blade [value:bladeNumber] Ambient Temperature Sensor fault...state is
CRITICAL.
OA: Blade [value:bladeNumber] Ambient Temperature Sensor fault...state is
DEGRADED.
OA: Blade [value:bladeNumber] cannot partner with its neighbor.
OA: Blade [value:bladeNumber] Disk Tray is Open...state is CRITICAL.
OA: Blade [value:bladeNumber] Disk Tray is Open...state is DEGRADED.
OA: Blade [value:bladeNumber] FRU memory fault...state is CRITICAL.
OA: Blade [value:bladeNumber] FRU memory fault...state is DEGRADED.
OA: Blade [value:bladeNumber] has integrated blade cross connection, Mezzanine
card [value] is superfluous.
OA: Blade [value:bladeNumber] Internal Temperature caution...state is CRITICAL.
OA: Blade [value:bladeNumber] Internal Temperature caution...state is DEGRADED.
OA: Blade [value:bladeNumber] Internal Temperature Sensor fault...state is
CRITICAL.
OA: Blade [value:bladeNumber] Internal Temperature Sensor fault...state is
DEGRADED.
OA: Blade [value:bladeNumber] is not properly cooled.
OA: Blade [value:bladeNumber] is not supported.
OA: Blade [value:bladeNumber] is reporting degraded health status.
OA: Blade [value:bladeNumber] is reporting failed health status.
OA: Blade [value:bladeNumber] Main Logic Board fault...state is CRITICAL.
OA: Blade [value:bladeNumber] Main Logic Board fault...state is DEGRADED.
OA: Blade [value:bladeNumber] needs a partner device.
OA: Blade [value:bladeNumber] over temperature...state is CRITICAL.
OA: Blade [value:bladeNumber] over temperature...state is DEGRADED.
OA: Blade [value:bladeNumber] PCI device missing...state is CRITICAL.
HPE Onboard Administrator errors 259