HPE ProLiant Gen9 - Page 83

Action
1. Reset the RESTful API.
2. If the issue persists, reset the iLO API.
For more information, see Managing Hewlett Packard Enterprise Servers Using the RESTful API on the
Hewlett Packard Enterprise website.
336-HP RESTful API Error
Symptom
336-HP RESTful API Error – One or more configuration settings could not be applied.
Cause
The BIOS configuration change was consumed through the RESTful API and one or more of the requested
changes resulted in an error. For example, attempting to set an attribute to an invalid or unsupported value.
Action
For more information, see the SettingsResult property in the RESTful API.
For more information, see Managing Hewlett Packard Enterprise Servers Using the RESTful API on the
Hewlett Packard Enterprise website.
337-HP RESTful API Error
Symptom
337-HP RESTful API Error – Unable to communicate with iLO FW due to datacenter configuration lock being
enabled. BIOS configuration resources may not be up-to-date.
Cause
The iLO RESTful API returns an HTTP Error Status of 401-Unauthorized for any BIOS GET or PUT request.
This occurs when the iLO security settings prevent BIOS communication with iLO.
Action
Disable the datacenter configuration lock.
338-HP RESTful API Error
Symptom
338-HP RESTful API Error – Unable to communicate with iLO FW. BIOS configuration resources may not be
up-to-date.
Cause
The iLO RESTful API returned an HTTP Error Status other than 200-OK or 201-Created for a BIOS POST
request to register or refresh the BIOS REST provider.
Action
Restore Manufacturing Defaults in RBSU.
336-HP RESTful API Error 83