Figure 4-38 Removing the bolts from the corner ttings
Step 2 Install the four legs of the outdoor unit at the four corners of the condenser.
Figure 4-39 Installing legs
Step 3 Put the four legs to the ground to lay the outdoor unit horizontally.
When turning the outdoor unit, do not hold it by using two legs. Otherwise, the
outdoor unit is damaged.
NetCol8000-A(045, 055, 060, 090, 120) In-room Air
Cooled Smart Cooling Product
User Manual 4 System Installation
Issue 05 (2020-10-10) Copyright © Huawei Technologies Co., Ltd. 84
To Next Page
Loading...
