Hypertherm ArcGlide Torch Height Control User Manual

ArcGlide THC Instruction Manual 3-13
OPERATION
HMI Parameter Value
Ohmic Plate Sense When this parameter is ON, the Ohmic contact sense is used.
Kerf Detect
When this parameter is ON, automatic kerf detection is active. When a kerf crossing
is detected, AVC is disabled and the torch position is fixed for a short period to avoid
diving into the workpiece.
Kerf Level
This parameter sets a sensitivity threshold to detect kerf. The range is 1 (more
sensitive) to 10 (less sensitive). The default setting is 5.
<Diagnostics> Select this line to view the Diagnostics screen.
<Installation Data> Select this line to display the Installation screen.
<back> Select this line to return to the Main screen.

Hypertherm ArcGlide Torch Height Control Specifications

General

Brand	Hypertherm
Model	ArcGlide Torch Height Control
Category	Cutter
Language	English