3-24 ArcGlide THC Instruction Manual
OPERATION
ArcGlide Process screen in Phoenix software
ArcGlide operating parameters
The parameters shown in the following illustration of the Process screen in the Phoenix software determine the
operation of an ArcGlide THC that is configured with a Hypertherm CNC. Many of these parameters interact with other
parameters on this screen or on other screens in the software. The tables following this illustration describes each
parameter and how to set it for the results you want.
ArcGlide operating parameters can also be viewed in the HMI display.
To Next Page
Loading...
Need help?
General
