Hypertherm ArcGlide Torch Height Control User Manual

4-4 ArcGlide THC Instruction Manual
MAINTENANCE
Apply a film
of oil
Sealing strip
The sealing strip behind the carriage must be oiled at every lubrication interval.
To oil the sealing strip:
1. Remove the front panel to access the carriage and sealing strip.
2. Apply a few drops of oil (Shell Tellus 100 heavy hydraulic fluid is recommended) to the sealing strip.
3. Replace the front panel.
4. Use the UP and DOWN switch to move the carriage along length of the sealing strip and distribute the oil.

Hypertherm ArcGlide Torch Height Control Specifications

General

Brand	Hypertherm
Model	ArcGlide Torch Height Control
Category	Cutter
Language	English