ArcGlide THC Instruction Manual 3-21
OPERATION
HMI Parameter Value
Relative Speed Gain This gain value regulates the speed of the lifter.
Relative Position Gain This gain is used for closed loop positioning.
Relative ARC Volts Gain This gain is used when the THC is operating closed-loop arc voltage control.
Arc Voltage Calibration This value is used to finely calibrate the measured arc voltage accuracy
Display Units The units of measurement, inches (in) or millimeters (mm), that are used in the display.
Language The language selected for the display.
<back> Return to the Main Display.
To Next Page
Loading...
